#Blue antifreeze coolant manual
#Blue antifreeze coolant free

For cold climates use 67% (2:1) volume, concentrations above 67% volume are not recommended and give no advantage. In line with most car manufacturers Chemiphase recommends a 50% (1:1) volume solution for optimum performance. The freeze protection afforded by the various dilutions is detailed in the table above: In order to provide a satisfactory level of corrosion protection it is recommended to use at least 33% (1:2) volume of Chemflow 40 in the coolant solution. Chemiphase recommends that for optimum performance distilled or deionized water is used. These specifications as well as many years of practical experience in the field have demonstrated that Chemflow 40 engine coolant concentrate is suitable for use with all type of cars currently manufactured in Europe Freeze Protection Dilution Rate of Chemflow 40 AntifreezeĬhemflow 40 is a concentrated product and should be diluted for use with good quality water.

ChemFlow 40 successfully passes the FVV Heft R443 tests (Germany).

PerformanceĬhemflow 40 complies with the following quality standards:

#Blue antifreeze coolant manual

Always refer to the OEM's manual for recommended antifreeze coolant type.įleet trials have shown that when used at the correct concentration coolants based on Organic Acid Inhibitor Technology continue to provide effective corrosion protection for up to 250,000 km for passenger cars and 500,000km in commercial vehicles. ChemFlow 40 antifreeze coolant provides year-round frost- and corrosion protection and should be used undiluted in a cooling system.ĬhemFlow 40 antifreeze coolant is recommended for use in cooling systems of all types of liquid cooled automotive and industrial internal combustion engines. Thanks to the balanced additive package and high quality Mono Ethylene Glycol, this standard quality coolant belongs to the highest quality in the market.

Meets most International and European Standards.ĬhemFlow 40 antifreeze coolant can be used throughout the year in all cooling systems in petrol and diesel engines.

Compatibility with rubber and plastics used in the cooling system.

Protection against frost, depending on the concentration chosen.

Anticorrosion protection of all metals and alloys used in the cooling system of modern vehicles.

Thermal characteristics that permit effective engine cooling without boiling.

This product is suitable for both petrol and diesel engines, carefully chosen additives give the following properties in aqueous mixtures. Chemflow 40 is an engine coolant concentrate (antifreeze) based on mono ethylene glycol, containing no nitrites, amines or phosphates (NAP free). ChemFlow 40 is neutral in relation to gaskets and hoses and has good resistance against foam.

#Blue antifreeze coolant free

Nitrate, amine and phosphate (NAP) free.ChemFlow 40 is a 'British-Standard antifreeze Coolant' composed of Mono Ethylene Glycol which uses Organic Acid Inhibitor Technology in combination with silicate and is free from nitrites, amines, phosphates, borates to obtain good protection of all hard metals in the cooling system and engine.

Excellent corrosion protection on cast iron, aluminium, copper alloys and solder.

If in doubt about the performance or compatibility with the previous fluid it is recommended to drain the system, to rinse and refill. Provides protection for a wide range of metals prolonging the life of your radiator, pumps, the block itself and the entire engine cooling system.

It is suitable for use in the coolant system in all gasoline and diesel engines, as well as protecting static cooling systems in industry. A universal engine coolant suitable for use all year round. Nitrite, amine, phosphate, silicate and borax free, Mono-ethylene Glycol based engine coolant formulated to meet the requirements of BS6580.